Cisco Catalyst 9200L-24T-4X-A 24-Port Switch 4×10G Uplinks/Advantage
Cisco Catalyst 9200L-24T-4X-A 24-Port Gigabit Data Switch with 4×10 Gbps Uplinks, Network Advantage
The Cisco Catalyst 9200L-24T-4X-A is a 1 RU fixed-uplink access switch in the Catalyst 9200L family, optimized for high-density branch and small-campus deployments. It provides 24 data-only 10/100/1000 RJ-45 downlink ports, four fixed 10 Gbps SFP+ uplinks, a default PWR-C5-125WAC AC platinum-efficient power supply, and fixed redundant fans.
Built on the Cisco UADP 2.0 Mini ASIC with 2 GB DRAM and 4 GB flash, it delivers 128 Gbps of non-blocking switching capacity and 190.4 Mpps forwarding performance.
Running Cisco IOS XE with the Network Advantage license, it supports StackWise-80 stacking (80 Gbps bidirectional backplane), full Layer 3 routing, VRF, VXLAN, LISP, SGT segmentation, and integrates seamlessly with Cisco DNA Center or Meraki Dashboard for unified management, automation, and advanced analytics.
Overview
Highlights
-
24 × 1 GbE Downlink Ports
10/100/1000 RJ-45 autosensing data-only ports for high-density wired access. -
4 × 10 Gbps Fixed Uplinks
Four SFP+ ports for high-speed aggregation—no optional modules required. -
128 Gbps Switching Capacity & 190.4 Mpps Forwarding
Non-blocking fabric and wire-speed packet forwarding across all ports. -
StackWise-80 Stacking
Stateful stacking of up to eight switches with 80 Gbps bidirectional backplane bandwidth and sub-50 ms failover. -
Resilient, Energy-Efficient Hardware
Fixed redundant fans, front-to-back airflow, and IEEE 802.3az Energy-Efficient Ethernet for low-power operation. -
Advanced Security
AES-128 MACsec encryption, Secure Boot with Trust Anchor Module, 802.1X, DHCP Snooping, Dynamic ARP Inspection, IP Source Guard, and scalable ACLs. -
Full Layer 3 & SD-Access Features
Supports OSPF, EIGRP, IS-IS, RIP, VRF, VXLAN, LISP, SGT segmentation, Full Flexible NetFlow monitoring, and SD-Access assurance. -
Programmability & PnP
Cisco IOS XE with model-driven APIs, streaming telemetry, Plug and Play deployment, and a programmable ASIC pipeline.
Recommended Accessories
| Accessory | Category | Description |
|---|---|---|
| C9200L-STACK-KIT= | Stacking Module | StackWise-80 kit spare for Catalyst 9200L models |
| STACK-T4-50CM/1M/3M | Stacking Cable | Type 3 stacking cables (0.5 m, 1 m, 3 m lengths) |
| PWR-C5-125WAC/2= | Power Supply | 125 W AC platinum-efficient spare PSU |
Comparison with Similar Models
| Model | Downlinks | Uplinks | License | Stacking |
|---|---|---|---|---|
| C9200L-24T-4X-A | 24×1 GbE data-only | 4×10 Gbps SFP+ | Network Advantage | 80 Gbps |
| C9200L-24T-4X-E | 24×1 GbE data-only | 4×10 Gbps SFP+ | Network Essentials | 80 Gbps |
| C9200L-24P-4X-A | 24× PoE+ | 4×10 Gbps SFP+ | Network Advantage | 80 Gbps |
| C9200L-24P-4X-E | 24× PoE+ | 4×10 Gbps SFP+ | Network Essentials | 80 Gbps |
Specifications
| Parameter | Specification |
|---|---|
| Product Code | C9200L-24T-4X-A |
| Description | Catalyst 9200L 24-port data-only switch with 4×10 Gbps uplinks, Network Advantage license |
| Downlink Ports | 24×10/100/1000 RJ-45 autosensing (data-only) |
| Uplink Ports | 4×10 Gbps SFP+ fixed |
| Default Power Supply | PWR-C5-125WAC AC platinum-efficient |
| Fans | Fixed, redundant |
| DRAM | 2 GB |
| Flash | 4 GB |
| Switching Capacity | 128 Gbps non-blocking |
| Forwarding Rate | 190.4 Mpps (64-byte packets) |
| Stacking Bandwidth | 80 Gbps (StackWise-80) |
| Chassis Dimensions (H×W×D) | 1.73″×17.5″×11.3″ (4.4×44.5×28.8 cm) |
| Total MAC Addresses | 16,000 |
| IPv4 Routes (ARP + learned) | 11,000 total (8,000 direct; 3,000 indirect) |
| IPv4 Routing Entries | 3,000 |
| IPv6 Routing Entries | 1,500 |
| Multicast Routing Scale | 1,000 |
| QoS Scale Entries | 1,000 |
| ACL Scale Entries | 1,500 |
| Packet Buffer | 6 MB |
| Flexible NetFlow Entries | 16,000 flows |
| VLAN IDs | 1,024 |
| SVIs | 512 |
| Jumbo Frames | Up to 9,198 bytes |
| MTBF | 525,990 hours |
More Details
Quality Certifications
Warranty
100% Low Price Guarantee
Network-switch.com provides high-quality products at low wholesale prices
100% Quality Assurance
All items are ORIGINAL and GENUINE only.
Item conditions are "New Sealed". They are fully tested by CCIE Engineers.
Free Technical Support
Our FREE Expert Consultancy Support is over the phone, by chat, by email or by login remotely.
100% Money Back Guarantee
You can contact our customer service team to exchange or return any product that you bought from us.
Flexible Secure Payment & Shipment
Verified authorization: Mcafee Secure, VeriSign Secured
Return Material Authorization (RMA) Process
Standard Warranty Policy
Original New Sealed Enterprise Hardware: 3 Years
Original New Sealed Consumer Devices: 1 Year
The Support Contacts
If your Cisco products failed, you must contact your sales representative to verify product failure. If the problem still can't correct by remote support methods i.e. email or phone support, the RMA procedure will issue.
Original: $3,948.00
-70%$3,948.00
$1,184.40Cisco Catalyst 9200L-24T-4X-A 24-Port Switch 4×10G Uplinks/Advantage
Cisco Catalyst 9200L-24T-4X-A 24-Port Gigabit Data Switch with 4×10 Gbps Uplinks, Network Advantage
The Cisco Catalyst 9200L-24T-4X-A is a 1 RU fixed-uplink access switch in the Catalyst 9200L family, optimized for high-density branch and small-campus deployments. It provides 24 data-only 10/100/1000 RJ-45 downlink ports, four fixed 10 Gbps SFP+ uplinks, a default PWR-C5-125WAC AC platinum-efficient power supply, and fixed redundant fans.
Built on the Cisco UADP 2.0 Mini ASIC with 2 GB DRAM and 4 GB flash, it delivers 128 Gbps of non-blocking switching capacity and 190.4 Mpps forwarding performance.
Running Cisco IOS XE with the Network Advantage license, it supports StackWise-80 stacking (80 Gbps bidirectional backplane), full Layer 3 routing, VRF, VXLAN, LISP, SGT segmentation, and integrates seamlessly with Cisco DNA Center or Meraki Dashboard for unified management, automation, and advanced analytics.
Overview
Highlights
-
24 × 1 GbE Downlink Ports
10/100/1000 RJ-45 autosensing data-only ports for high-density wired access. -
4 × 10 Gbps Fixed Uplinks
Four SFP+ ports for high-speed aggregation—no optional modules required. -
128 Gbps Switching Capacity & 190.4 Mpps Forwarding
Non-blocking fabric and wire-speed packet forwarding across all ports. -
StackWise-80 Stacking
Stateful stacking of up to eight switches with 80 Gbps bidirectional backplane bandwidth and sub-50 ms failover. -
Resilient, Energy-Efficient Hardware
Fixed redundant fans, front-to-back airflow, and IEEE 802.3az Energy-Efficient Ethernet for low-power operation. -
Advanced Security
AES-128 MACsec encryption, Secure Boot with Trust Anchor Module, 802.1X, DHCP Snooping, Dynamic ARP Inspection, IP Source Guard, and scalable ACLs. -
Full Layer 3 & SD-Access Features
Supports OSPF, EIGRP, IS-IS, RIP, VRF, VXLAN, LISP, SGT segmentation, Full Flexible NetFlow monitoring, and SD-Access assurance. -
Programmability & PnP
Cisco IOS XE with model-driven APIs, streaming telemetry, Plug and Play deployment, and a programmable ASIC pipeline.
Recommended Accessories
| Accessory | Category | Description |
|---|---|---|
| C9200L-STACK-KIT= | Stacking Module | StackWise-80 kit spare for Catalyst 9200L models |
| STACK-T4-50CM/1M/3M | Stacking Cable | Type 3 stacking cables (0.5 m, 1 m, 3 m lengths) |
| PWR-C5-125WAC/2= | Power Supply | 125 W AC platinum-efficient spare PSU |
Comparison with Similar Models
| Model | Downlinks | Uplinks | License | Stacking |
|---|---|---|---|---|
| C9200L-24T-4X-A | 24×1 GbE data-only | 4×10 Gbps SFP+ | Network Advantage | 80 Gbps |
| C9200L-24T-4X-E | 24×1 GbE data-only | 4×10 Gbps SFP+ | Network Essentials | 80 Gbps |
| C9200L-24P-4X-A | 24× PoE+ | 4×10 Gbps SFP+ | Network Advantage | 80 Gbps |
| C9200L-24P-4X-E | 24× PoE+ | 4×10 Gbps SFP+ | Network Essentials | 80 Gbps |
Specifications
| Parameter | Specification |
|---|---|
| Product Code | C9200L-24T-4X-A |
| Description | Catalyst 9200L 24-port data-only switch with 4×10 Gbps uplinks, Network Advantage license |
| Downlink Ports | 24×10/100/1000 RJ-45 autosensing (data-only) |
| Uplink Ports | 4×10 Gbps SFP+ fixed |
| Default Power Supply | PWR-C5-125WAC AC platinum-efficient |
| Fans | Fixed, redundant |
| DRAM | 2 GB |
| Flash | 4 GB |
| Switching Capacity | 128 Gbps non-blocking |
| Forwarding Rate | 190.4 Mpps (64-byte packets) |
| Stacking Bandwidth | 80 Gbps (StackWise-80) |
| Chassis Dimensions (H×W×D) | 1.73″×17.5″×11.3″ (4.4×44.5×28.8 cm) |
| Total MAC Addresses | 16,000 |
| IPv4 Routes (ARP + learned) | 11,000 total (8,000 direct; 3,000 indirect) |
| IPv4 Routing Entries | 3,000 |
| IPv6 Routing Entries | 1,500 |
| Multicast Routing Scale | 1,000 |
| QoS Scale Entries | 1,000 |
| ACL Scale Entries | 1,500 |
| Packet Buffer | 6 MB |
| Flexible NetFlow Entries | 16,000 flows |
| VLAN IDs | 1,024 |
| SVIs | 512 |
| Jumbo Frames | Up to 9,198 bytes |
| MTBF | 525,990 hours |
More Details
Quality Certifications
Warranty
100% Low Price Guarantee
Network-switch.com provides high-quality products at low wholesale prices
100% Quality Assurance
All items are ORIGINAL and GENUINE only.
Item conditions are "New Sealed". They are fully tested by CCIE Engineers.
Free Technical Support
Our FREE Expert Consultancy Support is over the phone, by chat, by email or by login remotely.
100% Money Back Guarantee
You can contact our customer service team to exchange or return any product that you bought from us.
Flexible Secure Payment & Shipment
Verified authorization: Mcafee Secure, VeriSign Secured
Return Material Authorization (RMA) Process
Standard Warranty Policy
Original New Sealed Enterprise Hardware: 3 Years
Original New Sealed Consumer Devices: 1 Year
The Support Contacts
If your Cisco products failed, you must contact your sales representative to verify product failure. If the problem still can't correct by remote support methods i.e. email or phone support, the RMA procedure will issue.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Cisco Catalyst 9200L-24T-4X-A 24-Port Gigabit Data Switch with 4×10 Gbps Uplinks, Network Advantage
The Cisco Catalyst 9200L-24T-4X-A is a 1 RU fixed-uplink access switch in the Catalyst 9200L family, optimized for high-density branch and small-campus deployments. It provides 24 data-only 10/100/1000 RJ-45 downlink ports, four fixed 10 Gbps SFP+ uplinks, a default PWR-C5-125WAC AC platinum-efficient power supply, and fixed redundant fans.
Built on the Cisco UADP 2.0 Mini ASIC with 2 GB DRAM and 4 GB flash, it delivers 128 Gbps of non-blocking switching capacity and 190.4 Mpps forwarding performance.
Running Cisco IOS XE with the Network Advantage license, it supports StackWise-80 stacking (80 Gbps bidirectional backplane), full Layer 3 routing, VRF, VXLAN, LISP, SGT segmentation, and integrates seamlessly with Cisco DNA Center or Meraki Dashboard for unified management, automation, and advanced analytics.
Overview
Highlights
-
24 × 1 GbE Downlink Ports
10/100/1000 RJ-45 autosensing data-only ports for high-density wired access. -
4 × 10 Gbps Fixed Uplinks
Four SFP+ ports for high-speed aggregation—no optional modules required. -
128 Gbps Switching Capacity & 190.4 Mpps Forwarding
Non-blocking fabric and wire-speed packet forwarding across all ports. -
StackWise-80 Stacking
Stateful stacking of up to eight switches with 80 Gbps bidirectional backplane bandwidth and sub-50 ms failover. -
Resilient, Energy-Efficient Hardware
Fixed redundant fans, front-to-back airflow, and IEEE 802.3az Energy-Efficient Ethernet for low-power operation. -
Advanced Security
AES-128 MACsec encryption, Secure Boot with Trust Anchor Module, 802.1X, DHCP Snooping, Dynamic ARP Inspection, IP Source Guard, and scalable ACLs. -
Full Layer 3 & SD-Access Features
Supports OSPF, EIGRP, IS-IS, RIP, VRF, VXLAN, LISP, SGT segmentation, Full Flexible NetFlow monitoring, and SD-Access assurance. -
Programmability & PnP
Cisco IOS XE with model-driven APIs, streaming telemetry, Plug and Play deployment, and a programmable ASIC pipeline.
Recommended Accessories
| Accessory | Category | Description |
|---|---|---|
| C9200L-STACK-KIT= | Stacking Module | StackWise-80 kit spare for Catalyst 9200L models |
| STACK-T4-50CM/1M/3M | Stacking Cable | Type 3 stacking cables (0.5 m, 1 m, 3 m lengths) |
| PWR-C5-125WAC/2= | Power Supply | 125 W AC platinum-efficient spare PSU |
Comparison with Similar Models
| Model | Downlinks | Uplinks | License | Stacking |
|---|---|---|---|---|
| C9200L-24T-4X-A | 24×1 GbE data-only | 4×10 Gbps SFP+ | Network Advantage | 80 Gbps |
| C9200L-24T-4X-E | 24×1 GbE data-only | 4×10 Gbps SFP+ | Network Essentials | 80 Gbps |
| C9200L-24P-4X-A | 24× PoE+ | 4×10 Gbps SFP+ | Network Advantage | 80 Gbps |
| C9200L-24P-4X-E | 24× PoE+ | 4×10 Gbps SFP+ | Network Essentials | 80 Gbps |
Specifications
| Parameter | Specification |
|---|---|
| Product Code | C9200L-24T-4X-A |
| Description | Catalyst 9200L 24-port data-only switch with 4×10 Gbps uplinks, Network Advantage license |
| Downlink Ports | 24×10/100/1000 RJ-45 autosensing (data-only) |
| Uplink Ports | 4×10 Gbps SFP+ fixed |
| Default Power Supply | PWR-C5-125WAC AC platinum-efficient |
| Fans | Fixed, redundant |
| DRAM | 2 GB |
| Flash | 4 GB |
| Switching Capacity | 128 Gbps non-blocking |
| Forwarding Rate | 190.4 Mpps (64-byte packets) |
| Stacking Bandwidth | 80 Gbps (StackWise-80) |
| Chassis Dimensions (H×W×D) | 1.73″×17.5″×11.3″ (4.4×44.5×28.8 cm) |
| Total MAC Addresses | 16,000 |
| IPv4 Routes (ARP + learned) | 11,000 total (8,000 direct; 3,000 indirect) |
| IPv4 Routing Entries | 3,000 |
| IPv6 Routing Entries | 1,500 |
| Multicast Routing Scale | 1,000 |
| QoS Scale Entries | 1,000 |
| ACL Scale Entries | 1,500 |
| Packet Buffer | 6 MB |
| Flexible NetFlow Entries | 16,000 flows |
| VLAN IDs | 1,024 |
| SVIs | 512 |
| Jumbo Frames | Up to 9,198 bytes |
| MTBF | 525,990 hours |
More Details
Quality Certifications
Warranty
100% Low Price Guarantee
Network-switch.com provides high-quality products at low wholesale prices
100% Quality Assurance
All items are ORIGINAL and GENUINE only.
Item conditions are "New Sealed". They are fully tested by CCIE Engineers.
Free Technical Support
Our FREE Expert Consultancy Support is over the phone, by chat, by email or by login remotely.
100% Money Back Guarantee
You can contact our customer service team to exchange or return any product that you bought from us.
Flexible Secure Payment & Shipment
Verified authorization: Mcafee Secure, VeriSign Secured
Return Material Authorization (RMA) Process
Standard Warranty Policy
Original New Sealed Enterprise Hardware: 3 Years
Original New Sealed Consumer Devices: 1 Year
The Support Contacts
If your Cisco products failed, you must contact your sales representative to verify product failure. If the problem still can't correct by remote support methods i.e. email or phone support, the RMA procedure will issue.
