Cisco Catalyst 9200L-48T-4X-E 48-Port Switch 4×10G Uplinks/Essentials
Cisco Catalyst 9200L-48T-4X-E 48-Port Data Switch, 4×10 Gbps Uplinks, Network Essentials
The Cisco Catalyst 9200L-48T-4X-E is a compact, fixed-uplink access switch in the Catalyst 9200L family, engineered for high-density branch and small-campus environments. It provides 48 data-only 10/100/1000 RJ-45 downlinks and four fixed 10 Gbps SFP+ uplinks, powered by a single PWR-C5-125WAC AC platinum PSU and fixed redundant fans.
Built on the Cisco UADP 2.0 Mini ASIC with 2 GB DRAM and 4 GB flash, it runs Cisco IOS XE under the Network Essentials license and supports StackWise-80 stacking (up to 80 Gbps). Native integration with Cisco DNA Center and Meraki Dashboard delivers unified management and automation.
Overview
Highlights
-
48 × 1 GbE Downlink Ports
48 10/100/1000 RJ-45 autosensing data-only ports. -
4 × 10 Gbps Fixed Uplinks
Four SFP+ uplinks at 10 Gbps each—no optional modules required. -
176 Gbps Non-Blocking Fabric & 130.95 Mpps Forwarding
Wire-speed performance across all ports. -
StackWise-80 Stacking
Up to 8 switches stacked with 80 Gbps bidirectional backplane bandwidth and sub-50 ms failover. -
Energy-Efficient, Resilient Hardware
Fixed, redundant fans with front-to-back airflow and IEEE 802.3az Energy-Efficient Ethernet. -
Enterprise-Grade Security
AES-128 MACsec, Secure Boot with Trust Anchor, 802.1X, DHCP Snooping, Dynamic ARP Inspection, IP Source Guard, and scalable ACLs. -
Flexible Management & Automation
CLI, embedded Web UI, SNMP v1/v2c/v3, RMON, NETCONF/RESTCONF, Plug and Play; integrates with Cisco DNA Center and Meraki Dashboard. -
Programmability with Cisco IOS XE
Model-driven APIs and streaming telemetry on a common enterprise OS.
Recommended Accessories
| Accessory | Category | Description |
|---|---|---|
| C9200L-STACK-KIT= | Stacking Module | StackWise-80 kit (2 adapters + stacking cable) |
| STACK-T4-50CM/1M/3M | Stacking Cable | Type 3 stacking cables (0.5 m, 1 m, 3 m) |
| PWR-C5-125WAC | Power Supply | 125 W AC platinum-efficient fixed PSU |
Comparison with Similar Models
| Model | Downlinks | Uplinks | License | Stacking |
|---|---|---|---|---|
| C9200L-48T-4X-E | 48×1 GbE data-only | 4×10 Gbps SFP+ | Network Essentials | 80 Gbps |
| C9200L-48T-4X-A | 48×1 GbE data-only | 4×10 Gbps SFP+ | Network Advantage | 80 Gbps |
| C9200L-48P-4X-E | 48×1 GbE PoE+ | 4×10 Gbps SFP+ | Network Essentials | 80 Gbps |
| C9200L-48P-4X-A | 48×1 GbE PoE+ | 4×10 Gbps SFP+ | Network Advantage | 80 Gbps |
Specifications
| Parameter | Specification |
|---|---|
| Product Code | C9200L-48T-4X-E |
| Description | Catalyst 9200L 48-port data switch with 4×10 Gbps uplinks, Network Essentials license |
| Downlink Ports | 48× 10/100/1000 RJ-45 autosensing (data-only) |
| Uplink Ports | 4× 1/10 Gbps SFP+ fixed |
| Switching Capacity | 176 Gbps non-blocking |
| Capacity with Stacking | 256 Gbps |
| Forwarding Rate | 130.95 Mpps (64-byte packets) |
| Forwarding with Stacking | 190 Mpps |
| Stacking Bandwidth | 80 Gbps (StackWise-80) |
| DRAM / Flash | 2 GB DRAM; 4 GB flash |
| Total MAC Addresses | 16,000 entries |
| IPv4 Routes (ARP + learned) | 11,000 total (8,000 direct + 3,000 indirect) |
| IPv6 Routing Entries | 1,500 |
| ACL Scale Entries | 1,500 |
| Packet Buffer | 6 MB |
| Flexible NetFlow Entries | 16,000 flows |
| Jumbo Frames | Up to 9,198 bytes |
| Power Supply | PWR-C5-125WAC AC platinum (125 W) |
| Fans | Fixed, redundant |
| Dimensions (H × W × D) | 1.73″ × 17.5″ × 11.3″ (4.4 × 44.5 × 28.8 cm) |
| Weight | 9.97 lb (4.53 kg) |
| Operating Temp. / Humidity | 32 °F–113 °F (0 °C–45 °C); 5–95% non-condensing |
| Certifications | UL/CSA/EN/IEC 60950-1; AS/NZS 60950.1 |
| Mean Time Between Failures (MTBF) | 503,400 hours |
More Details
Quality Certifications
Warranty
100% Low Price Guarantee
Network-switch.com provides high-quality products at low wholesale prices
100% Quality Assurance
All items are ORIGINAL and GENUINE only.
Item conditions are "New Sealed". They are fully tested by CCIE Engineers.
Free Technical Support
Our FREE Expert Consultancy Support is over the phone, by chat, by email or by login remotely.
100% Money Back Guarantee
You can contact our customer service team to exchange or return any product that you bought from us.
Flexible Secure Payment & Shipment
Verified authorization: Mcafee Secure, VeriSign Secured
Return Material Authorization (RMA) Process
Standard Warranty Policy
Original New Sealed Enterprise Hardware: 3 Years
Original New Sealed Consumer Devices: 1 Year
The Support Contacts
If your Cisco products failed, you must contact your sales representative to verify product failure. If the problem still can't correct by remote support methods i.e. email or phone support, the RMA procedure will issue.
Original: $5,562.00
-70%$5,562.00
$1,668.60Cisco Catalyst 9200L-48T-4X-E 48-Port Switch 4×10G Uplinks/Essentials
Cisco Catalyst 9200L-48T-4X-E 48-Port Data Switch, 4×10 Gbps Uplinks, Network Essentials
The Cisco Catalyst 9200L-48T-4X-E is a compact, fixed-uplink access switch in the Catalyst 9200L family, engineered for high-density branch and small-campus environments. It provides 48 data-only 10/100/1000 RJ-45 downlinks and four fixed 10 Gbps SFP+ uplinks, powered by a single PWR-C5-125WAC AC platinum PSU and fixed redundant fans.
Built on the Cisco UADP 2.0 Mini ASIC with 2 GB DRAM and 4 GB flash, it runs Cisco IOS XE under the Network Essentials license and supports StackWise-80 stacking (up to 80 Gbps). Native integration with Cisco DNA Center and Meraki Dashboard delivers unified management and automation.
Overview
Highlights
-
48 × 1 GbE Downlink Ports
48 10/100/1000 RJ-45 autosensing data-only ports. -
4 × 10 Gbps Fixed Uplinks
Four SFP+ uplinks at 10 Gbps each—no optional modules required. -
176 Gbps Non-Blocking Fabric & 130.95 Mpps Forwarding
Wire-speed performance across all ports. -
StackWise-80 Stacking
Up to 8 switches stacked with 80 Gbps bidirectional backplane bandwidth and sub-50 ms failover. -
Energy-Efficient, Resilient Hardware
Fixed, redundant fans with front-to-back airflow and IEEE 802.3az Energy-Efficient Ethernet. -
Enterprise-Grade Security
AES-128 MACsec, Secure Boot with Trust Anchor, 802.1X, DHCP Snooping, Dynamic ARP Inspection, IP Source Guard, and scalable ACLs. -
Flexible Management & Automation
CLI, embedded Web UI, SNMP v1/v2c/v3, RMON, NETCONF/RESTCONF, Plug and Play; integrates with Cisco DNA Center and Meraki Dashboard. -
Programmability with Cisco IOS XE
Model-driven APIs and streaming telemetry on a common enterprise OS.
Recommended Accessories
| Accessory | Category | Description |
|---|---|---|
| C9200L-STACK-KIT= | Stacking Module | StackWise-80 kit (2 adapters + stacking cable) |
| STACK-T4-50CM/1M/3M | Stacking Cable | Type 3 stacking cables (0.5 m, 1 m, 3 m) |
| PWR-C5-125WAC | Power Supply | 125 W AC platinum-efficient fixed PSU |
Comparison with Similar Models
| Model | Downlinks | Uplinks | License | Stacking |
|---|---|---|---|---|
| C9200L-48T-4X-E | 48×1 GbE data-only | 4×10 Gbps SFP+ | Network Essentials | 80 Gbps |
| C9200L-48T-4X-A | 48×1 GbE data-only | 4×10 Gbps SFP+ | Network Advantage | 80 Gbps |
| C9200L-48P-4X-E | 48×1 GbE PoE+ | 4×10 Gbps SFP+ | Network Essentials | 80 Gbps |
| C9200L-48P-4X-A | 48×1 GbE PoE+ | 4×10 Gbps SFP+ | Network Advantage | 80 Gbps |
Specifications
| Parameter | Specification |
|---|---|
| Product Code | C9200L-48T-4X-E |
| Description | Catalyst 9200L 48-port data switch with 4×10 Gbps uplinks, Network Essentials license |
| Downlink Ports | 48× 10/100/1000 RJ-45 autosensing (data-only) |
| Uplink Ports | 4× 1/10 Gbps SFP+ fixed |
| Switching Capacity | 176 Gbps non-blocking |
| Capacity with Stacking | 256 Gbps |
| Forwarding Rate | 130.95 Mpps (64-byte packets) |
| Forwarding with Stacking | 190 Mpps |
| Stacking Bandwidth | 80 Gbps (StackWise-80) |
| DRAM / Flash | 2 GB DRAM; 4 GB flash |
| Total MAC Addresses | 16,000 entries |
| IPv4 Routes (ARP + learned) | 11,000 total (8,000 direct + 3,000 indirect) |
| IPv6 Routing Entries | 1,500 |
| ACL Scale Entries | 1,500 |
| Packet Buffer | 6 MB |
| Flexible NetFlow Entries | 16,000 flows |
| Jumbo Frames | Up to 9,198 bytes |
| Power Supply | PWR-C5-125WAC AC platinum (125 W) |
| Fans | Fixed, redundant |
| Dimensions (H × W × D) | 1.73″ × 17.5″ × 11.3″ (4.4 × 44.5 × 28.8 cm) |
| Weight | 9.97 lb (4.53 kg) |
| Operating Temp. / Humidity | 32 °F–113 °F (0 °C–45 °C); 5–95% non-condensing |
| Certifications | UL/CSA/EN/IEC 60950-1; AS/NZS 60950.1 |
| Mean Time Between Failures (MTBF) | 503,400 hours |
More Details
Quality Certifications
Warranty
100% Low Price Guarantee
Network-switch.com provides high-quality products at low wholesale prices
100% Quality Assurance
All items are ORIGINAL and GENUINE only.
Item conditions are "New Sealed". They are fully tested by CCIE Engineers.
Free Technical Support
Our FREE Expert Consultancy Support is over the phone, by chat, by email or by login remotely.
100% Money Back Guarantee
You can contact our customer service team to exchange or return any product that you bought from us.
Flexible Secure Payment & Shipment
Verified authorization: Mcafee Secure, VeriSign Secured
Return Material Authorization (RMA) Process
Standard Warranty Policy
Original New Sealed Enterprise Hardware: 3 Years
Original New Sealed Consumer Devices: 1 Year
The Support Contacts
If your Cisco products failed, you must contact your sales representative to verify product failure. If the problem still can't correct by remote support methods i.e. email or phone support, the RMA procedure will issue.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Cisco Catalyst 9200L-48T-4X-E 48-Port Data Switch, 4×10 Gbps Uplinks, Network Essentials
The Cisco Catalyst 9200L-48T-4X-E is a compact, fixed-uplink access switch in the Catalyst 9200L family, engineered for high-density branch and small-campus environments. It provides 48 data-only 10/100/1000 RJ-45 downlinks and four fixed 10 Gbps SFP+ uplinks, powered by a single PWR-C5-125WAC AC platinum PSU and fixed redundant fans.
Built on the Cisco UADP 2.0 Mini ASIC with 2 GB DRAM and 4 GB flash, it runs Cisco IOS XE under the Network Essentials license and supports StackWise-80 stacking (up to 80 Gbps). Native integration with Cisco DNA Center and Meraki Dashboard delivers unified management and automation.
Overview
Highlights
-
48 × 1 GbE Downlink Ports
48 10/100/1000 RJ-45 autosensing data-only ports. -
4 × 10 Gbps Fixed Uplinks
Four SFP+ uplinks at 10 Gbps each—no optional modules required. -
176 Gbps Non-Blocking Fabric & 130.95 Mpps Forwarding
Wire-speed performance across all ports. -
StackWise-80 Stacking
Up to 8 switches stacked with 80 Gbps bidirectional backplane bandwidth and sub-50 ms failover. -
Energy-Efficient, Resilient Hardware
Fixed, redundant fans with front-to-back airflow and IEEE 802.3az Energy-Efficient Ethernet. -
Enterprise-Grade Security
AES-128 MACsec, Secure Boot with Trust Anchor, 802.1X, DHCP Snooping, Dynamic ARP Inspection, IP Source Guard, and scalable ACLs. -
Flexible Management & Automation
CLI, embedded Web UI, SNMP v1/v2c/v3, RMON, NETCONF/RESTCONF, Plug and Play; integrates with Cisco DNA Center and Meraki Dashboard. -
Programmability with Cisco IOS XE
Model-driven APIs and streaming telemetry on a common enterprise OS.
Recommended Accessories
| Accessory | Category | Description |
|---|---|---|
| C9200L-STACK-KIT= | Stacking Module | StackWise-80 kit (2 adapters + stacking cable) |
| STACK-T4-50CM/1M/3M | Stacking Cable | Type 3 stacking cables (0.5 m, 1 m, 3 m) |
| PWR-C5-125WAC | Power Supply | 125 W AC platinum-efficient fixed PSU |
Comparison with Similar Models
| Model | Downlinks | Uplinks | License | Stacking |
|---|---|---|---|---|
| C9200L-48T-4X-E | 48×1 GbE data-only | 4×10 Gbps SFP+ | Network Essentials | 80 Gbps |
| C9200L-48T-4X-A | 48×1 GbE data-only | 4×10 Gbps SFP+ | Network Advantage | 80 Gbps |
| C9200L-48P-4X-E | 48×1 GbE PoE+ | 4×10 Gbps SFP+ | Network Essentials | 80 Gbps |
| C9200L-48P-4X-A | 48×1 GbE PoE+ | 4×10 Gbps SFP+ | Network Advantage | 80 Gbps |
Specifications
| Parameter | Specification |
|---|---|
| Product Code | C9200L-48T-4X-E |
| Description | Catalyst 9200L 48-port data switch with 4×10 Gbps uplinks, Network Essentials license |
| Downlink Ports | 48× 10/100/1000 RJ-45 autosensing (data-only) |
| Uplink Ports | 4× 1/10 Gbps SFP+ fixed |
| Switching Capacity | 176 Gbps non-blocking |
| Capacity with Stacking | 256 Gbps |
| Forwarding Rate | 130.95 Mpps (64-byte packets) |
| Forwarding with Stacking | 190 Mpps |
| Stacking Bandwidth | 80 Gbps (StackWise-80) |
| DRAM / Flash | 2 GB DRAM; 4 GB flash |
| Total MAC Addresses | 16,000 entries |
| IPv4 Routes (ARP + learned) | 11,000 total (8,000 direct + 3,000 indirect) |
| IPv6 Routing Entries | 1,500 |
| ACL Scale Entries | 1,500 |
| Packet Buffer | 6 MB |
| Flexible NetFlow Entries | 16,000 flows |
| Jumbo Frames | Up to 9,198 bytes |
| Power Supply | PWR-C5-125WAC AC platinum (125 W) |
| Fans | Fixed, redundant |
| Dimensions (H × W × D) | 1.73″ × 17.5″ × 11.3″ (4.4 × 44.5 × 28.8 cm) |
| Weight | 9.97 lb (4.53 kg) |
| Operating Temp. / Humidity | 32 °F–113 °F (0 °C–45 °C); 5–95% non-condensing |
| Certifications | UL/CSA/EN/IEC 60950-1; AS/NZS 60950.1 |
| Mean Time Between Failures (MTBF) | 503,400 hours |
More Details
Quality Certifications
Warranty
100% Low Price Guarantee
Network-switch.com provides high-quality products at low wholesale prices
100% Quality Assurance
All items are ORIGINAL and GENUINE only.
Item conditions are "New Sealed". They are fully tested by CCIE Engineers.
Free Technical Support
Our FREE Expert Consultancy Support is over the phone, by chat, by email or by login remotely.
100% Money Back Guarantee
You can contact our customer service team to exchange or return any product that you bought from us.
Flexible Secure Payment & Shipment
Verified authorization: Mcafee Secure, VeriSign Secured
Return Material Authorization (RMA) Process
Standard Warranty Policy
Original New Sealed Enterprise Hardware: 3 Years
Original New Sealed Consumer Devices: 1 Year
The Support Contacts
If your Cisco products failed, you must contact your sales representative to verify product failure. If the problem still can't correct by remote support methods i.e. email or phone support, the RMA procedure will issue.
