Cisco Catalyst 9200L-24P-4X-E 24-Port PoE+ 4×10G Uplinks/Essentials
Cisco Catalyst 9200L-24P-4X-E 24-Port PoE+ Gigabit Switch with 4×10 Gbps Uplinks, Network Essentials
The Cisco Catalyst 9200L-24P-4X-E is a 1 RU fixed-uplink access switch in the Catalyst 9200L family, engineered for high-density branch and small-campus environments. It provides 24 auto-sensing 10/100/1000 Mbps PoE+ copper downlinks (up to 30 W per port) and four fixed 10 Gbps SFP+ uplinks.
By default it ships with a PWR-C5-600WAC AC platinum-efficient power supply and fixed redundant fans. Built on the Cisco UADP 2.0 Mini ASIC with 2 GB DRAM and 4 GB flash, it delivers 128 Gbps of non-blocking switching capacity and a forwarding rate of 190.4 Mpps.
Running Cisco IOS XE under the Network Essentials license, it supports StackWise-80 stacking (80 Gbps bidirectional backplane), and integrates natively with Cisco DNA Center or Meraki Dashboard for unified management and automation.
Overview
Highlights
-
24× Full PoE+ Downlink Ports
24× 10/100/1000 Mbps RJ-45 PoE+ ports (IEEE 802.3at, up to 30 W each). -
4×10 Gbps Fixed Uplinks
Four SFP+ uplink ports at 10 Gbps—no optional modules required. -
Robust Switching Performance
128 Gbps non-blocking fabric; 190.4 Mpps forwarding rate. -
StackWise-80 Stacking
Stateful stacking of up to eight switches with 80 Gbps bidirectional backplane bandwidth and sub-50 ms failover. -
Enterprise-Grade Security & Resiliency
AES-128 MACsec encryption, Secure Boot with Trust Anchor, 802.1X, DHCP Snooping, Dynamic ARP Inspection, IP Source Guard, scalable ACLs; fixed redundant fans and optional secondary PSU. -
Programmability & Automation
Cisco IOS XE with model-driven APIs, streaming telemetry, Plug-and-Play; native integration with Cisco DNA Center and Meraki Dashboard.
Recommended Accessories
| Accessory | Category | Description |
|---|---|---|
| C9200L-STACK-KIT= | Stacking Module | StackWise-80 kit spare for Catalyst 9200L models |
| STACK-T4-1M | Stacking Cable | 1 m Type 3 stacking cable for StackWise-80 |
| PWR-C5-600WAC/2= | Power Supply | 600 W AC platinum-efficient spare PSU |
Comparison with Similar Models
| Model | Downlinks | Uplinks | License |
|---|---|---|---|
| C9200L-24P-4X-E | 24× 1 GbE PoE+ | 4× 10 Gbps SFP+ | Network Essentials |
| C9200L-24P-4X-A | 24× 1 GbE PoE+ | 4× 10 Gbps SFP+ | Network Advantage |
| C9200L-24T-4X-E | 24× 1 GbE data-only | 4× 10 Gbps SFP+ | Network Essentials |
Specifications
| Parameter | Specification |
|---|---|
| Product Code | C9200L-24P-4X-E |
| Description | Catalyst 9200L 24-port PoE+ switch with 4×10 Gbps uplinks, Network Essentials license |
| Downlink Ports | 24× 10/100/1000 Mbps RJ-45 PoE+ (up to 30 W/port) |
| Uplink Ports | 4× 10 Gbps SFP+ fixed uplinks |
| Default Power Supply | PWR-C5-600WAC AC platinum-efficient |
| Fans | Fixed, redundant |
| Software License | Network Essentials |
| DRAM / Flash | 2 GB DRAM; 4 GB flash |
| Switching Capacity | 128 Gbps non-blocking |
| Forwarding Rate | 190.4 Mpps (64-byte packets) |
| Stacking Bandwidth | 80 Gbps (StackWise-80) |
| Total MAC Addresses | 16,000 entries |
| IPv4 Routes (ARP + learned) | 11,000 total (8,000 direct, 3,000 indirect) |
| IPv4 Routing Entries | 3,000 entries |
| IPv6 Routing Entries | 1,500 entries |
| Multicast Routing Scale | 1,000 entries |
| QoS Scale Entries | 1,000 entries |
| ACL Scale Entries | 1,500 entries |
| Packet Buffer | 6 MB |
| Flexible NetFlow Entries | 16,000 flows |
| VLAN IDs | 4,094 |
| Total Switched Virtual Interfaces (SVIs) | 512 |
| Jumbo Frames | Up to 9,198 bytes |
| Mean Time Between Failures (MTBF) | 390,310 hours |
| Chassis Dimensions (H×W×D) | 1.73″ × 17.5″ × 11.3″ (4.4 × 44.5 × 28.8 cm) |
| Weight | 7.27 lb (3.30 kg) |
| Operating Temperature / Humidity | 32 °F–113 °F (0 °C–45 °C); 5–95 % non-condensing |
More Details
Quality Certifications
Warranty
100% Low Price Guarantee
Network-switch.com provides high-quality products at low wholesale prices
100% Quality Assurance
All items are ORIGINAL and GENUINE only.
Item conditions are "New Sealed". They are fully tested by CCIE Engineers.
Free Technical Support
Our FREE Expert Consultancy Support is over the phone, by chat, by email or by login remotely.
100% Money Back Guarantee
You can contact our customer service team to exchange or return any product that you bought from us.
Flexible Secure Payment & Shipment
Verified authorization: Mcafee Secure, VeriSign Secured
Return Material Authorization (RMA) Process
Standard Warranty Policy
Original New Sealed Enterprise Hardware: 3 Years
Original New Sealed Consumer Devices: 1 Year
The Support Contacts
If your Cisco products failed, you must contact your sales representative to verify product failure. If the problem still can't correct by remote support methods i.e. email or phone support, the RMA procedure will issue.
Original: $4,930.00
-70%$4,930.00
$1,479.00Cisco Catalyst 9200L-24P-4X-E 24-Port PoE+ 4×10G Uplinks/Essentials
Cisco Catalyst 9200L-24P-4X-E 24-Port PoE+ Gigabit Switch with 4×10 Gbps Uplinks, Network Essentials
The Cisco Catalyst 9200L-24P-4X-E is a 1 RU fixed-uplink access switch in the Catalyst 9200L family, engineered for high-density branch and small-campus environments. It provides 24 auto-sensing 10/100/1000 Mbps PoE+ copper downlinks (up to 30 W per port) and four fixed 10 Gbps SFP+ uplinks.
By default it ships with a PWR-C5-600WAC AC platinum-efficient power supply and fixed redundant fans. Built on the Cisco UADP 2.0 Mini ASIC with 2 GB DRAM and 4 GB flash, it delivers 128 Gbps of non-blocking switching capacity and a forwarding rate of 190.4 Mpps.
Running Cisco IOS XE under the Network Essentials license, it supports StackWise-80 stacking (80 Gbps bidirectional backplane), and integrates natively with Cisco DNA Center or Meraki Dashboard for unified management and automation.
Overview
Highlights
-
24× Full PoE+ Downlink Ports
24× 10/100/1000 Mbps RJ-45 PoE+ ports (IEEE 802.3at, up to 30 W each). -
4×10 Gbps Fixed Uplinks
Four SFP+ uplink ports at 10 Gbps—no optional modules required. -
Robust Switching Performance
128 Gbps non-blocking fabric; 190.4 Mpps forwarding rate. -
StackWise-80 Stacking
Stateful stacking of up to eight switches with 80 Gbps bidirectional backplane bandwidth and sub-50 ms failover. -
Enterprise-Grade Security & Resiliency
AES-128 MACsec encryption, Secure Boot with Trust Anchor, 802.1X, DHCP Snooping, Dynamic ARP Inspection, IP Source Guard, scalable ACLs; fixed redundant fans and optional secondary PSU. -
Programmability & Automation
Cisco IOS XE with model-driven APIs, streaming telemetry, Plug-and-Play; native integration with Cisco DNA Center and Meraki Dashboard.
Recommended Accessories
| Accessory | Category | Description |
|---|---|---|
| C9200L-STACK-KIT= | Stacking Module | StackWise-80 kit spare for Catalyst 9200L models |
| STACK-T4-1M | Stacking Cable | 1 m Type 3 stacking cable for StackWise-80 |
| PWR-C5-600WAC/2= | Power Supply | 600 W AC platinum-efficient spare PSU |
Comparison with Similar Models
| Model | Downlinks | Uplinks | License |
|---|---|---|---|
| C9200L-24P-4X-E | 24× 1 GbE PoE+ | 4× 10 Gbps SFP+ | Network Essentials |
| C9200L-24P-4X-A | 24× 1 GbE PoE+ | 4× 10 Gbps SFP+ | Network Advantage |
| C9200L-24T-4X-E | 24× 1 GbE data-only | 4× 10 Gbps SFP+ | Network Essentials |
Specifications
| Parameter | Specification |
|---|---|
| Product Code | C9200L-24P-4X-E |
| Description | Catalyst 9200L 24-port PoE+ switch with 4×10 Gbps uplinks, Network Essentials license |
| Downlink Ports | 24× 10/100/1000 Mbps RJ-45 PoE+ (up to 30 W/port) |
| Uplink Ports | 4× 10 Gbps SFP+ fixed uplinks |
| Default Power Supply | PWR-C5-600WAC AC platinum-efficient |
| Fans | Fixed, redundant |
| Software License | Network Essentials |
| DRAM / Flash | 2 GB DRAM; 4 GB flash |
| Switching Capacity | 128 Gbps non-blocking |
| Forwarding Rate | 190.4 Mpps (64-byte packets) |
| Stacking Bandwidth | 80 Gbps (StackWise-80) |
| Total MAC Addresses | 16,000 entries |
| IPv4 Routes (ARP + learned) | 11,000 total (8,000 direct, 3,000 indirect) |
| IPv4 Routing Entries | 3,000 entries |
| IPv6 Routing Entries | 1,500 entries |
| Multicast Routing Scale | 1,000 entries |
| QoS Scale Entries | 1,000 entries |
| ACL Scale Entries | 1,500 entries |
| Packet Buffer | 6 MB |
| Flexible NetFlow Entries | 16,000 flows |
| VLAN IDs | 4,094 |
| Total Switched Virtual Interfaces (SVIs) | 512 |
| Jumbo Frames | Up to 9,198 bytes |
| Mean Time Between Failures (MTBF) | 390,310 hours |
| Chassis Dimensions (H×W×D) | 1.73″ × 17.5″ × 11.3″ (4.4 × 44.5 × 28.8 cm) |
| Weight | 7.27 lb (3.30 kg) |
| Operating Temperature / Humidity | 32 °F–113 °F (0 °C–45 °C); 5–95 % non-condensing |
More Details
Quality Certifications
Warranty
100% Low Price Guarantee
Network-switch.com provides high-quality products at low wholesale prices
100% Quality Assurance
All items are ORIGINAL and GENUINE only.
Item conditions are "New Sealed". They are fully tested by CCIE Engineers.
Free Technical Support
Our FREE Expert Consultancy Support is over the phone, by chat, by email or by login remotely.
100% Money Back Guarantee
You can contact our customer service team to exchange or return any product that you bought from us.
Flexible Secure Payment & Shipment
Verified authorization: Mcafee Secure, VeriSign Secured
Return Material Authorization (RMA) Process
Standard Warranty Policy
Original New Sealed Enterprise Hardware: 3 Years
Original New Sealed Consumer Devices: 1 Year
The Support Contacts
If your Cisco products failed, you must contact your sales representative to verify product failure. If the problem still can't correct by remote support methods i.e. email or phone support, the RMA procedure will issue.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Cisco Catalyst 9200L-24P-4X-E 24-Port PoE+ Gigabit Switch with 4×10 Gbps Uplinks, Network Essentials
The Cisco Catalyst 9200L-24P-4X-E is a 1 RU fixed-uplink access switch in the Catalyst 9200L family, engineered for high-density branch and small-campus environments. It provides 24 auto-sensing 10/100/1000 Mbps PoE+ copper downlinks (up to 30 W per port) and four fixed 10 Gbps SFP+ uplinks.
By default it ships with a PWR-C5-600WAC AC platinum-efficient power supply and fixed redundant fans. Built on the Cisco UADP 2.0 Mini ASIC with 2 GB DRAM and 4 GB flash, it delivers 128 Gbps of non-blocking switching capacity and a forwarding rate of 190.4 Mpps.
Running Cisco IOS XE under the Network Essentials license, it supports StackWise-80 stacking (80 Gbps bidirectional backplane), and integrates natively with Cisco DNA Center or Meraki Dashboard for unified management and automation.
Overview
Highlights
-
24× Full PoE+ Downlink Ports
24× 10/100/1000 Mbps RJ-45 PoE+ ports (IEEE 802.3at, up to 30 W each). -
4×10 Gbps Fixed Uplinks
Four SFP+ uplink ports at 10 Gbps—no optional modules required. -
Robust Switching Performance
128 Gbps non-blocking fabric; 190.4 Mpps forwarding rate. -
StackWise-80 Stacking
Stateful stacking of up to eight switches with 80 Gbps bidirectional backplane bandwidth and sub-50 ms failover. -
Enterprise-Grade Security & Resiliency
AES-128 MACsec encryption, Secure Boot with Trust Anchor, 802.1X, DHCP Snooping, Dynamic ARP Inspection, IP Source Guard, scalable ACLs; fixed redundant fans and optional secondary PSU. -
Programmability & Automation
Cisco IOS XE with model-driven APIs, streaming telemetry, Plug-and-Play; native integration with Cisco DNA Center and Meraki Dashboard.
Recommended Accessories
| Accessory | Category | Description |
|---|---|---|
| C9200L-STACK-KIT= | Stacking Module | StackWise-80 kit spare for Catalyst 9200L models |
| STACK-T4-1M | Stacking Cable | 1 m Type 3 stacking cable for StackWise-80 |
| PWR-C5-600WAC/2= | Power Supply | 600 W AC platinum-efficient spare PSU |
Comparison with Similar Models
| Model | Downlinks | Uplinks | License |
|---|---|---|---|
| C9200L-24P-4X-E | 24× 1 GbE PoE+ | 4× 10 Gbps SFP+ | Network Essentials |
| C9200L-24P-4X-A | 24× 1 GbE PoE+ | 4× 10 Gbps SFP+ | Network Advantage |
| C9200L-24T-4X-E | 24× 1 GbE data-only | 4× 10 Gbps SFP+ | Network Essentials |
Specifications
| Parameter | Specification |
|---|---|
| Product Code | C9200L-24P-4X-E |
| Description | Catalyst 9200L 24-port PoE+ switch with 4×10 Gbps uplinks, Network Essentials license |
| Downlink Ports | 24× 10/100/1000 Mbps RJ-45 PoE+ (up to 30 W/port) |
| Uplink Ports | 4× 10 Gbps SFP+ fixed uplinks |
| Default Power Supply | PWR-C5-600WAC AC platinum-efficient |
| Fans | Fixed, redundant |
| Software License | Network Essentials |
| DRAM / Flash | 2 GB DRAM; 4 GB flash |
| Switching Capacity | 128 Gbps non-blocking |
| Forwarding Rate | 190.4 Mpps (64-byte packets) |
| Stacking Bandwidth | 80 Gbps (StackWise-80) |
| Total MAC Addresses | 16,000 entries |
| IPv4 Routes (ARP + learned) | 11,000 total (8,000 direct, 3,000 indirect) |
| IPv4 Routing Entries | 3,000 entries |
| IPv6 Routing Entries | 1,500 entries |
| Multicast Routing Scale | 1,000 entries |
| QoS Scale Entries | 1,000 entries |
| ACL Scale Entries | 1,500 entries |
| Packet Buffer | 6 MB |
| Flexible NetFlow Entries | 16,000 flows |
| VLAN IDs | 4,094 |
| Total Switched Virtual Interfaces (SVIs) | 512 |
| Jumbo Frames | Up to 9,198 bytes |
| Mean Time Between Failures (MTBF) | 390,310 hours |
| Chassis Dimensions (H×W×D) | 1.73″ × 17.5″ × 11.3″ (4.4 × 44.5 × 28.8 cm) |
| Weight | 7.27 lb (3.30 kg) |
| Operating Temperature / Humidity | 32 °F–113 °F (0 °C–45 °C); 5–95 % non-condensing |
More Details
Quality Certifications
Warranty
100% Low Price Guarantee
Network-switch.com provides high-quality products at low wholesale prices
100% Quality Assurance
All items are ORIGINAL and GENUINE only.
Item conditions are "New Sealed". They are fully tested by CCIE Engineers.
Free Technical Support
Our FREE Expert Consultancy Support is over the phone, by chat, by email or by login remotely.
100% Money Back Guarantee
You can contact our customer service team to exchange or return any product that you bought from us.
Flexible Secure Payment & Shipment
Verified authorization: Mcafee Secure, VeriSign Secured
Return Material Authorization (RMA) Process
Standard Warranty Policy
Original New Sealed Enterprise Hardware: 3 Years
Original New Sealed Consumer Devices: 1 Year
The Support Contacts
If your Cisco products failed, you must contact your sales representative to verify product failure. If the problem still can't correct by remote support methods i.e. email or phone support, the RMA procedure will issue.
